Browse all practice questions for the Physical Therapy Treatment and Management (PTTM) Exam 2 Practice. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Physical Therapy Treatment and Management (PTTM) Exam 2 Practice course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Arrange contraction types from greatest to least force capability:
  • Gravity-eliminated ROM is most appropriate to use when
  • The pectoralis major is a one-joint muscle with multiple actions. To lengthen it, or lengthen the muscle, the shoulder should be placed into:
  • Which factor can negatively influence a patient's strength performance during testing?
  • Bony landmarks are used for goniometer alignment because they:
  • In wrist ROM measurement, stabilizing the forearm helps ensure measurement accuracy by preventing movement of which part?
  • Which scenario represents a noncapsular pattern example?
  • Passive intervertebral accessory motion testing is primarily used to assess which?
  • If the observed end feel is not what is expected, the therapist should suspect:
  • Which statement BEST describes a direct vs indirect functional deficit caused by impaired muscle performance?
  • Muscle length testing primarily assesses:
  • Which trio best defines the core elements of muscle performance in clinical assessment?
  • Which statement about muscle performance is most accurate?
  • What does AROM describe?
  • Muscle length tests should generally be performed:
  • Forward head posture is MOST commonly associated with which clinical finding?
  • Which term describes the ability of muscle groups to perform a movement to sustain that movement?
  • Why does the therapist visually estimate ROM before measuring?
  • Which scenario uses gravity to assist limb movement during evaluation?
  • Which of the following is NOT a factor affecting range of motion?
  • A capsular pattern is defined as
  • Which combination of findings MOST supports involvement of inert tissues rather than contractile tissues?
  • Which statement BEST describes R1 and R2 during joint mobility assessment?
  • Which tissue demonstrates the least creep during end-feel assessment?
  • Which tissue is NOT contracting during passive ROM?
  • Which tissue adaptation is most directly linked to improved lateral force transmission in a muscle unit?
  • Which statement best explains why the term 'tight' should be used cautiously?
  • Why is it important to properly position the patient during MMT?
  • Which device is used to study angular motion with an electrical signal in research?
  • What does 'single motion recording' indicate in ROM documentation?
  • Capsular fibrosis results in decreased joint mobility due to:
  • Which of the following is NOT a goal of proper MMT positioning?
  • Rounded shoulders and scapular protraction increase risk for which shoulder pathology?
  • Which characteristics are important when evaluating a muscle strength test?
  • Guarded muscles may influence findings when evaluating which structures?
  • A joint mobility grade of 3 indicates:
  • The primary purpose of evaluating muscle length is to help create what?
  • A patient demonstrates weakness in a muscle. Which consequence is MOST likely?
  • Which clinical scenario most strongly suggests involvement of contractile tissue?
  • A physical therapist measures a patient's knee ROM, then another therapist measures the same knee ROM. This demonstrates which reliability?
  • Forward head posture is most commonly associated with which clinical finding?
  • Osteokinematics occurs in how many cardinal planes?
  • Which statement BEST distinguishes component motion from joint play?
  • Which of the following helps reduce measurement error the MOST?
  • During passive ROM, pain most likely indicates involvement of:
  • A capsular pattern is BEST described as:
  • Passive ROM is commonly performed first because it:
  • During MMT of rhomboids and middle trapezius, which factor helps isolate the target muscle?
  • Pain produced during muscle lengthening may indicate that:
  • Which instrument is used to measure torque across speeds under dynamic conditions?
  • Which pairing correctly matches the arthrokinematic movement with its description?
  • Bilateral testing is useful because it allows assessment of:
  • Which end-feel type corresponds to a restriction due to joint capsule?
  • A measurement is taken during muscle length testing primarily to:
  • Which change would increase torque without changing muscle force?
  • During joint mobility testing, which finding represents NORMAL quality and end feel?
  • An abnormal muscle length test finding indicates impairment in which area of the ICF model?
  • On a certain joint mobility grading scale, which grade corresponds to considerable increase in motion?
  • Which reliability type tends to be higher in ROM measurement when the same clinician measures multiple times?
  • What is the PRIMARY purpose of evaluating muscle strength?
  • How would you document the ROM measurement for the left elbow with extension to 3 degrees past neutral and flexion to 150 degrees?
  • A patient presents with joint effusion and synovial inflammation causing a capsular pattern restriction. Which mechanism MOST likely contributes to the loss of motion?
  • Pain localized to the tendon during testing most likely indicates injury to which tissue?
  • ROM measurements are compared to normative values from which organization discussed in the lecture?
  • A patient begins elbow flexion at 10° because of a flexion contracture and reaches 145°. How should this be documented?
  • When performing distraction testing, which structure is primarily tested?
  • Why should therapists explain the ROM procedure before beginning?
  • Which term describes a soft end feel due to soft tissue compression at the end of passive range of motion?
  • END FEEL is defined as the characteristic feel to the resistance encountered at the end of normal PROM.
  • If no standardized value exists, muscle length should generally allow:
  • Which distance measure is commonly used to monitor changes in cardiopulmonary endurance over time in chronic conditions?
  • Which statement BEST explains why joint integrity and mobility are assessed?
  • Which sequence is MOST appropriate during ROM assessment?
  • A patient with a central nervous system lesion demonstrates a muscle that remains in a constant shortened state due to increased neural activity. This is an example of:
  • When distinguishing between MMT grades 4 and 5, the therapist should MOST rely on:
  • Converts joint angular motion into an electrical signal; can measure multiple joint movements, but require skill to use; most often seen in research
  • Muscle performance is BEST defined as:
  • The primary reason for proper stabilization during ROM assessment is to prevent substitution motions, which would:
  • During a muscle length test, the therapist should ask the patient about symptoms:
  • Asking the patient about the location of symptoms helps the therapist determine:
  • Which statement describes the first step when performing ROM measurement?
  • What type of tissue response is most likely if pain is present during active contraction but not during passive movement?
  • Symmetrical muscle length:
  • Which factor is most likely to decrease muscle extensibility over time?
  • Sustained elbow flexion while using a smartphone predisposes to which condition?
  • When testing a very strong patient, what issue may occur in MMT assessment?
  • For a single-joint muscle undergoing manual muscle testing (MMT), which position best optimizes testing?
  • Lack of proper stabilization primarily decreases:
  • Which assessment is MOST appropriate for measuring maximal muscle strength?
  • What term is appropriate for documenting muscle length results?
  • Which fiber type is BEST associated with high force production and rapid tension development?
  • Which MMT grades require the patient to hold against external resistance?
  • In ROM testing, which option describes a tissue-end feel associated with soft tissues stretching rather than bone contact?
  • The accuracy of a measurement; measuring what is intended to be measured
  • A patient demonstrates weakness during MMT. Which condition could contribute to this finding?
  • Which end-feel is typically associated with capsular or ligamentous stretch?
  • Why does ROM accuracy matter?
  • Which muscle is described as a one-joint muscle with multiple actions?
  • What numerical grade on the 0-6 joint mobility scale corresponds to 'normal motion'?
  • Simple tool to measure ROM and muscle length
  • Which MMT grade represents the ability to hold a position against gravity?
  • Which statement best describes the primary purpose of ROM measurement in physical therapy?
  • Which adaptation most explains early strength gains before visible muscle growth?
  • Which statement best describes how a two-joint muscle is lengthened during a muscle length test?
  • Which statement is most accurate regarding documenting ROM when there is a contracture preventing a zero starting position?
  • Which device measures jaw ROM?
  • Which end feel is considered NORMAL when muscle bulk limits motion?
  • Which muscle imbalance is most commonly caused by prolonged smartphone use?
  • Correct placement of the patient's limb during testing helps primarily to:
  • Which term describes the movement of joint surfaces in relation to one another, including rolling, gliding, and spinning?
  • A patient can hold a position against gravity but cannot resist external resistance. What MMT grade best fits this description?
  • Longer fascicle length is most advantageous for which movement?
  • Which term describes the ability to produce tension and resultant force based on muscle demand?
  • Which example represents a noncapsular pattern?
  • Goniometry measures ROM that is categorized as which type of motion?
  • In muscle length testing, a normative value is used to compare a patient’s flexibility to:
  • Which finding would be considered a qualitative measure during muscle performance assessment?
  • Which statement about interpreting bilateral MLT findings is MOST accurate?
  • Which statement BEST describes joint mobility (arthrokinematic) testing?
  • After strength training, which fiber adaptation is MOST accurate?
  • Which end feel is normal during true muscle lengthening?
  • Crepitus or clicking noted during ROM testing should be:
  • Measures temporomandibular joint ROM
  • If no standardized value exists for a muscle length, what ROM is generally expected?
  • Which position yields the greatest force generation at the onset of contraction?
  • Which pattern is characterized by unequal restriction of PROM caused by structures other than the entire joint capsule?
  • When testing muscles that perform similar movements (such as rhomboids and middle trapezius), the therapist should consider:
  • When a concave surface moves on a convex surface, the roll and glide occur:
  • Bilateral hamstring length limitations are often:
  • Which of the following is an objective, quantitative measure of muscle performance?
  • The therapist observes for substitutions or compensatory movements because they can:
  • Which scenario demonstrates active assistive ROM (AAROM)?
  • Which term describes movement of the whole bone resulting from rolling and sliding of the joint surfaces and is typically measured by goniometry?
  • Which of the following is NOT a purpose of manual muscle testing?
  • Full joint range of motion is important because it:
  • Which statement best describes why bony landmarks are used for goniometer alignment?
  • What end feel is considered normal during true muscle lengthening?
  • How would you document the ROM measurement of the right shoulder when abduction reaches 140 degrees with the elbow in extension?
  • Passive insufficiency is BEST described as:
  • Which accessory motion separates the joint surfaces and is commonly combined with joint mobilization to stretch the capsule?
  • What is the effect of capsular effusion on ROM?
  • Which finding is MOST consistent with the interpretation of distraction and compression testing?
  • Pain during muscle length testing localized to the muscle belly suggests injury to which tissue?
  • If a patient cannot begin at the normal zero-degree position due to a contracture, the therapist should:
  • Which option BEST defines the three elements of muscle performance?
  • Which sequence correctly ranks maximum force output among contraction types?
  • What does ROM stand for?
  • Passive elbow extension with a firm end feel most likely indicates limitation from what structure?
  • Most widely used instrument for joint ROM measurements, has a fulcrum, stationary arm, and moving arm.
  • Which muscle fiber type is BEST associated with high force production and tension generation?
  • Which muscle groups are less affected by gravity during MMT and thus less likely to be influenced by gravitational forces?
  • A firm end feel is typically produced by:
  • Which statement about gravity during MMT is MOST accurate?
  • ROM is helpful for which of the following purposes?
  • PROM is defined as?
  • A one-joint, one-action muscle is tested by moving the joint into the opposite motion of the muscle's action. Which pairing is correct?
  • Which is usually greater, PROM or AROM?
  • Accurate palpation of anatomical landmarks is important primarily for what?
  • What is the primary mechanism by which increases in pennation angle influence force production?
  • For chronic capsular fibrosis with decreased joint mobility, which intervention is MOST appropriate?
  • Which postural pattern is most commonly linked to extended device use leading to neck pain?
  • What tools are used to measure ROM?
  • Which instrument is described as the most widely used for joint ROM measurements?
  • Pain localized to the joint during testing is generally related to what?
  • Which statement BEST describes joint distraction?
  • Which tissue condition produces a hard end feel during passive range of motion?
  • Gravity-assisted movements are used during which component of the plan of care?
  • For multi-joint muscles such as finger flexors/extensors, a deficit of approximately _ may be acceptable.
  • Which accessory motion is correctly matched with its description?
  • Which statement BEST describes the relationship between strength gains and muscle growth?
  • Rounded shoulders and scapular protraction increase the risk for which shoulder pathology?
  • Which is NOT one of the standard muscle length result terms?
  • Gold standard of joint ROM measurement; routine use not recommended due to health risks of repeated exposure to radiation and high costs of procedure
  • Manual muscle testing reliability and validity is best described by which statement?
  • Which statement best differentiates component motion from joint play?
  • Which statement about abnormal muscle length is MOST accurate?
  • A muscle will produce the greatest force when it begins contraction in which position?
  • Quantified measurements are particularly useful for which purpose?
  • Which statement correctly describes accessory motions?
  • Which of the following is essential for documenting ROM results during rehabilitation planning?
  • To assess true joint ROM when AROM is limited, which measurement should be obtained?
  • Compared with the average person, a baseball pitcher is MOST likely to have:
  • Movement occurs perpendicular to gravity is called which ROM?
  • Which accessory motion approximates the joint surfaces and improves joint stability during muscle contraction?
  • PROM is the arc of motion that occurs when which person moves the joint?
  • Which statement BEST explains a key limitation of MMT at higher strength levels (grade 4-5)?
  • Why is true musculotendinous length unlikely to be assessed when pain occurs?
  • A ROM limitation described as firm is most consistent with tension in which structures?
  • During joint mobility testing, which structures are PRIMARILY being assessed?
  • If pain is produced during the muscle length test, what is the most likely action for the therapist?
  • What is the recommended palpation technique?
  • Which action most decreases variability when repeating ROM measurements over time?
  • Active insufficiency occurs because:
  • End feel is best described as being assessed at which portion of the ROM?
  • When documenting joint mobility, which findings are MOST important to report?
  • AROM and PROM are measured during which activity?
  • Pain localized to the muscle during testing most likely indicates injury to which tissue?
  • Which statement regarding passive insufficiency is MOST accurate?
  • During wrist ROM measurement, which structure should remain stabilized?
  • During joint mobility testing, R1 corresponds to
  • Which testing method is MOST appropriate for precise quantification of joint torque across speeds, but is less common in routine rehab due to equipment needs?
  • The term 'tight' should be used cautiously because it may result from:
  • Strength training increases pennation angle. What is the PRIMARY benefit of this adaptation?
  • A deficit in the length of which muscle may contribute to malpositioning of the shoulder joint?
  • Which imaging modality poses radiation exposure risk and high cost, not used routinely for ROM assessment?
  • Pain localized to the tendon during testing indicates injury to which structure?
  • In ROM measurement, what is the step immediately after stabilizing the proximal segment?
  • Which factor BEST predicts the immediate force a muscle can generate at a fixed length?
  • Accessory motions are best described as motions that:
  • A ceiling effect during strength testing occurs when:
  • Which ROM assessment tool provides digital data on the moving segment?
  • Which finding BEST describes a noncapsular pattern?
  • What term describes motion at a given joint or body part?
  • During a proper muscle length test, what end feel should the therapist expect?
  • The position in which the force of gravity will assist the movement of the body part is called what ROM?
  • Which term defines the rate of performing work as the product of force and velocity?
  • Which term describes a joint motion restriction pattern due to impairment or pathology?
  • Which statement best describes a noncapsular pattern?
  • Which assessment is MOST appropriate for measuring maximal muscle strength?
  • Which condition is a common cause of joint hypomobility?
  • A patient reports more pain when releasing a resisted isometric contraction than during the contraction. This finding:
  • Is the goniometer valid for measuring interphalangeals?
  • PROM is affected by which factors?
  • A physical therapist measures a patient's shoulder flexion today and again tomorrow using the same goniometer and technique. This demonstrates which type of reliability?
  • Quantifying muscle flexibility allows comparison to:
  • When interpreting ROM results, which patient factors should be considered to assess normal ranges?
  • Why does resisted isometric testing increase pain when contractile tissue is involved?
  • Which tissue adaptation is most directly linked to improved lateral force transmission?
  • Which of the following test results is most useful for assessing muscle endurance over time?
  • What is the primary purpose of performing MMT on both the involved and uninvolved sides?
  • A patient working against the force of gravity to move the body part is performing which ROM?
  • A patient reports pain during resisted muscle testing. How does this affect interpretation of strength?
  • What is the MOST appropriate patient position for manual muscle testing (MMT)?
  • Evaluating muscle length helps the therapist to do what?
  • Which test is a practical measure of cardiopulmonary endurance suitable for many clinical populations?
  • During interpretation of joint mobility testing, unrestricted but excessive joint glide MOST likely indicates:
  • During ROM testing, what is the recommended approach to compensatory movements?
  • A beginner weightlifter becomes stronger after several weeks of training but has minimal visible muscle growth. Which adaptation MOST likely explains this?
  • Passive intervertebral accessory motion (PIVM) testing is primarily used to assess:
  • Which of the following is NOT a factor influencing what is considered 'normal' ROM?
  • Which condition is MOST likely associated with joint hypermobility?
  • Which scenario BEST illustrates the use of active assistive ROM (AAROM)?
  • During joint mobility testing, which technique is MOST appropriate?
  • Which muscle adaptation is the PRIMARY contributor to hypertrophy and increased force production?
  • Why must a therapist attempt to break the test position during MMT?
  • When interpreting muscle length testing results, why should the uninvolved limb be used cautiously as a comparison?
  • Which three properties are most important when evaluating a muscle strength test?
  • Which palpation strategy is most effective for accurately identifying bony landmarks?
  • R1 during joint mobility assessment corresponds to:
  • Which tool is described as a simple tool to measure ROM and muscle length?
  • Following a muscle injury, poorly organized fibrous tissue develops and limits muscle extensibility. This condition is MOST consistent with:
  • If standardized values exist for muscle length, the clinician should do what with the patient's measurements?
  • If gravity is eliminated during testing, the patient is most likely to perform the movement with the limb supported to remove gravitational load.
  • In ROM measurement, which step follows palpating bony landmarks and aligning the goniometer?
  • AROM may be limited by which factors?
  • Which statement best describes hypermobility in joint mobility testing?
  • Muscle endurance is BEST defined as:
  • When is a gravity-eliminated position MOST appropriate during MMT?
  • What is the optimal testing position for a two-joint muscle during MMT?
  • Which statement correctly matches the direction of force used during joint mobility testing?
  • Following muscle injury, adhesions most directly limit which property?
  • Which postural pattern is most commonly associated with prolonged smartphone use?
  • Which best describes passive range of motion (PROM)?
  • A patient presents with an acute inflammatory joint condition causing a capsular pattern restriction. Which intervention is MOST appropriate?
  • During active ROM, pain may originate from:
  • What does a musculotendinous length test primarily assess?
  • Palpating anatomical landmarks during ROM assessment primarily serves to
  • Which of the following is an appropriate reason to measure ROM?
  • Which position would MOST effectively lengthen the hamstrings?
  • Manual muscle testing (MMT) is BEST described as:
  • Progression of PROM following surgery is described as which ROM approach?
  • Length deficits in which muscle have been linked to hamstring strain injury?
  • A patient attempts a maximal voluntary contraction. Approximately how long is needed for maximal motor unit recruitment?
  • Which statement about ROM data is most relevant to treatment planning?
  • To maximize length of the hamstrings during testing, which hip and knee positions should be used?
  • Which factor can influence what is considered 'normal' ROM?
  • Increasing fascicle length would MOST benefit which activity?
  • A patient cannot fully extend the wrist after injury. This ROM limitation may help explain difficulty with:
  • Which two movements are typically evaluated to assess joint ROM?
  • Which movement should be isolated during ROM testing?
  • In arthrokinematics, which movement involves one surface rolling across another surface with multiple contact points?
  • Which end feel is described as hard, abrupt resistance at end of PROM with no further motion possible (e.g., elbow extension)?
  • Which of the following is a limitation of manual muscle testing?
  • If a different end feel is encountered during end-range testing, what should the therapist do?
  • What is an inclinometer?
  • What is the primary purpose of measuring joint range of motion?
  • Which symptom cluster is MOST commonly linked to sustained mobile tech posture?
  • A therapist tests hamstring length by flexing the hip while extending the knee. The patient cannot achieve full hip flexion. What is the MOST likely explanation?
  • What is the primary reason proper body mechanics are important for the therapist during muscle length testing?
  • Which statement regarding abnormal end feel is MOST accurate?
  • Which statement correctly differentiates muscle endurance from cardiovascular endurance?
  • Which end feel is described as a firm end feel due to joint capsule and surrounding non-contractile tissue limitations at end range?
  • In bilateral hamstring length assessment, what pattern is commonly observed?
  • Which joint mobility grading scale is correctly matched?
  • To lengthen the subscapularis, the shoulder should be placed into which motion?
  • A practical consequence of improved ROM is enhanced what aspect of movement?
  • Proper stabilization during ROM testing is important because it:
  • Prolonged smartphone use MOST commonly contributes to which muscle imbalance?
  • Why are standardized patient positions used during ROM measurement?
  • Which test would most directly assess the concentric strength of a muscle?
  • A patient performing shoulder flexion while moving the arm upward parallel to gravity is demonstrating:
  • An irreversible contracture is BEST described as:
  • What is a primary reason to use an anti-gravity position when testing a muscle group?
  • What does the result of a muscle length test primarily quantify?
  • When available, muscle length results should be compared to:
  • Which of the following is NOT a primary purpose of ROM measurement?
  • Which factor most contributes to high ROM measurement quality?
  • A patient has chronic capsular fibrosis with decreased joint mobility. Which intervention is MOST appropriate?
  • Inert tissue involvement: which finding would support?
  • A shortening of which muscle can contribute to malpositioning of the shoulder joint?
  • If a tester observes no pain and no compensatory movements during length testing, the result most likely indicates:
  • In testing muscles that perform similar movements, which alignment is most critical for isolation?
  • Which sequence correctly outlines steps for ROM measurement with a goniometer?
  • Which statement BEST describes a capsular pattern?
  • Which structure is NOT typically palpated during a physical examination?
  • Abnormal muscle length is considered which type of impairment in the ICF model?
  • Which activity BEST assesses cardiopulmonary endurance?
  • Which factor is most directly related to connective tissue properties affecting ROM?
  • Which position lengthens the pectoralis major during muscle length testing?
  • Which factor MOST directly influences a muscle's force-generating capacity?
  • Which statement BEST describes the relationship between contraction speed and force production?
  • Which statement best distinguishes endurance from strength?
  • Which statement best describes the role of ROM measurement in clinical practice?
  • Under the ICF framework, an abnormal muscle length is categorized as which domain?
  • What can be done to get the highest reliability in ROM measurements?
  • Which information is gathered during joint mobility testing?
  • A two-joint muscle cannot generate effective force because it is placed in a shortened position across both joints. This phenomenon is known as:
  • What is the primary purpose of bilateral testing in muscle length assessment?
  • When a patient cannot achieve full available ROM during MMT, what is the implication?
  • Which of the following BEST describes the purpose of the joint integrity and mobility step in the physical therapy examination?
  • Radiographs are used to assess which aspect of goniometry?
  • What instrument is commonly used to measure joint range of motion?
  • Uses gravity as a reference point; protractor and weight gravity pendulum
  • An irreversible contracture is BEST described as:
  • Which statement best describes why maintaining proper limb alignment during the test is important?
  • Before using a goniometer, the therapist should FIRST:
  • During MMT, why is anti-gravity positioning preferred whenever possible?
  • A patient presents with limited muscle length due to adaptive shortening of the muscle without any underlying pathology. This is BEST described as:
  • Which adaptation improves force transfer from muscle fibers through connective tissue structures?
  • Sustained elbow flexion while holding a smartphone places an individual at increased risk for which condition?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy